We’re providing a much simpler mode of failover for the HQ server – to where they can still answer calls but can’t use call manager, workgroups etc. (This is usually the case as another server / Double Take etc is usually over most customers budgets) Every DID that points to.
PSTN failover is a backup to internal and transferred calls in the case of a WAN outage. If the WAN is out instead of the ShoreTel reporting, “That extension is unavailable,” from a remote site with no DVS or going directly to voicemail at the HQ site or remote site with DVS, the call will be routed out the trunks to the assigned DID, External Number or Menu configured for the users extension.
Both adding a new phone, and/or reassigning a phone to a new ShoreGear switch, require a change to the HQ server’s database. Without access to the HQ server no new IP Phone assignment or N+1 reassignment can occur. IP Phone Failover —Cross-Site (aka: Spare Switch) The concept of a “spare” switch was introduced in ShoreTel 9.
2/23/2018 · | Setting Up IP Phone Failover I P Phone failover will require that you have a spare switch set up in the ShoreTel system. You can use any physical switch EXCEPT V switches (50V, 90V) and you can also use a virtual switch. This will provide redundancy for your phones in the event of a switch failure.
9/16/2016 · I recently had a ShoreTel switch go bad. I set up a new one and changed the IP address and MAC address in in ShoreDirector to point to the new switch. All seemed to be fine as ports were showing in service and phone calls were able to be made. However phones started displaying Failover Mode where the Standard would be displayed.
An onsite ShoreTel system includes a Headquarters server and Distributed Voice Servers (DVS). These Distributed Voice Servers can be located anywhere on the network and provide production voicemail, ShoreTel Client (including softphone), Workgroup, auto.
The ShoreTel Virtual switches are now distributed as a part of your HQ and DVM server images. They live in the FTP server and can be retrieved in one of two ways. … done with physical switches. That “Spare” VM is free, by the way. And that also corrects your statement that N+1 failover must be to a physical switch. … ShoreTel is unable …
Installing your ShoreTel HQ server at the Data Center is becoming a standard deployment practice to increase business continuity during network and power outages and other disasters. One of the most common Ask DrVoIP question we hear is how to create redundant WAN paths to the data center using only simple static routes.
ShoreTel Virtual switches, resilience for free. A guide to deploying a spare ShoreTel virtual switch. In Release 14.2, One of the new features was ShoreTel Virtual switches. If you are a customer with an ESXI infrastructure already, it means you can start rolling out.
ShoreTel servers can fail up, so just put all of your HQ switches and Users on the DVM and if it fails, HQ will take over. If HQ fails, no real harm done. Sounds like a lot of hardware complexity but we are going to demonstrate this on a lab system consisting of a single Windows Laptop!
